Failure mode BlockSim

[Irene]

Hello,

I would like to know if it's possible to use BlockSim in this case:
I have a quantity of parts to be tested , a test file is proposed .Different stresses are applied on the parts .
So, There are different failure modes.
Can I simulate a failure mode with a blockdiagram ?
Please help
Regards

[nc35]

sorry,what's the BlockSim mean?

[tarik]

I need more details about the test you are performing to better answer your question. Your data can be analyzed with Weibull++ (for ‘regular’ life data analysis) or ALTA (if you have stress(s) with different levels or varying stress profiles). BlockSim can then be used to analyze the product considering the way the different failure modes (or different components within your product) are related

To nc35 BlockSim is a ReliaSoft product that is designed to analyze system reliability, maintainability, availability, optimization, throughput, life cycle cost for more info check: the following links http://www.reliasoft.com/BlockSim/index.html, http://www.weibull.com/systemrelwebcontents.htm.