Reliability Engineer Wanted

[John Grumbles]

Reliability Engineer


In this position, you will be responsible for ensuring that all facilities, equipment, and all of its associated support systems are effectively maintained with emphasis on improved equipment reliability, elimination of waste, elimination of variations to standards and effective utilization of manpower and talent.

Qualifications:

„« BS degree in Electrical, Mechanical or Chemical Engineering.
„« 3-5 years of experience in a large fast-paced manufacturing facility.
„« PLC experience along with a reliability background.
„« Experienced in leading within a multidiscipline plant maintenance group of 10 or more.
„« Proficient in a fast paced manufacturing environment utilizing a CMMS system for maintenance planning and execution of work.
„« Knowledge of TPM (Total Productive Maintenance), PM (Preventive Maintenance), PDM (Predictive Maintenance).
„« Knowledge of power distribution.
„« Knowledge and implementation of formal maintenance reliability methods.
„« Demonstrates effectiveness in implementing preventive and predictive maintenance.
„« Developing and implementing maintenance skill development programs.
„« Strong interpersonal and leadership skills are a must.

This position is with a major International company and is located in the Eastern United States.

John P. Grumbles
Executive Recruiter
Manufacturing and Engineering
Lucas Group
In Partnership with The Wall Street Journal
5001 Spring Valley Road, Ste. 200-E
Dallas, TX 75244
972-980-4943 ext. 145
972-392-7832 fax
www.lucasgroup.com

[ghallon]

Hello,
I am interested in this position. Following is my resume.


AMRIK S. GHALLON
PHONE (408) 666-9404
email: ghallon@comcast.net


OBJECTIVE


Senior Engineering position to contribute extensive experience in Reliability, Quality Assurance, and New Product Introduction success.

QUALIFICATIONS

14 years experience in engineering and QA management with expertise in:


* Managing reliability tests(HALT/HASS)
* Statistical analysis (DOE, FMEA, SPC)
* Launching new products
* Establishing quality systems
* Brown belt in Six-Sigma.
* Regulatory compliance
* ISO 9000 certification
* Managing and auditing suppliers
* Processes development

ACHIEVEMENTS

*Established reliability test plans and introduced new products to manufacturing.
Worked with product design team to document product specifications and process
control limits, test requirements, identified key failure modes with FMEA,
planned and conducted DVT, HALT, and HASS tests. Results: On time product
launch with fewer quality issues and changes required.

* Developed new process. Established objective; selected responses; selected
input factors; used design of experiment (DOE); collected and analyzed data;
verified results with additional experiments; optimized processes; established
SPC charts; selected vendors; established incoming inspection; published report
and presentation to management. Results: Developed new products in shorter
time and increase the yield of existing products.

* Managed PCBA contract manufacturers and electro-mechanical suppliers.
Chaired regular meetings with supplier; conducted factory audits; compiled
data, analyzed and created quality performance metrics. Established PMP,
CAR, MRB, and supplier scorecard. Managed BOM, RMA, ECN and new product release.
Results: Increased visibility of quality issues; reduced defects and improved yield.

PROFESSIONAL EXPERIENCE

*Reliability and Quality Engineer
Network General Corp, San Jose, CA 1.0 Yr
*Engineering Supervisor
Lin Engineering, Santa Clara, CA 0.5 Yr.
*Manager, Quality Systems
Larscom Inc., Milpitas, CA 1.5 Yrs.
*Sr. New Product Introduction Quality Engineer
Palm, Inc., Santa Clara, CA 1.0 Yr.
*Quality Manager/Sr. Staff Engineer
Seagate Technology, Fremont, CA 3.5 Yrs.
*Sr. Development Engineer
Western Digital Corp., S. Clara, CA 2.0 Yrs.
*Manufacturing Engineer
Komag Inc., Milpitas, CA 2.0 Yrs.
*Automation/Development Engineer
Olin Interconnect Tech., Manteca, CA 3 Yrs.

EDUCATION
M.E., General Engineering (CAD/CAM Mechanical),
San Jose State University, CA
B.E., Mechanical Engineering, G.S. Institute of Technology & Science,
Indore (M.P) India
Business Administration, University of California,
Santa Cruz, CA

SPECIAL SKILLS
Six Sigma, Lean Manufacturing, GMP, ISO 9000:2000, MIL-STD-810F,
MIL-STD-105, QSR, 21CFR820, FMEA, IPC-A-610, GR-63-CORE, GR-1089-CORE,
NEBS, UL60950, ESD-TR20.20-2000, Relex-7, HALT, HASS, ISO 13485,
ETSI EN 300 019-2-1, Statistics, SPC, DOE, Gauge R&R, Minitab,
Stepping Motor, HTML, Autocad, Inventor, Words, Excel, Access, Power point.


PROFESSIONAL EXPERIENCE

Network General Corp. (Formerly Network Associates), San Jose, CA
2004 - 2005
Reliability and Quality Engineering
Developed and implemented strategies to ensure product reliability.
Performed MTBF calculations, planed and conducted DVT, HALT, HASS
tests on new product releases. Used DOE to optimize system design.
Applied FMEA technique to create robust design. Worked with suppliers
to improve reliability of parts and system assembly. Used Six Sigma
techniques to develop strategies and quality process. Implemented
quality performance metrics to monitor and improve the product
quality. Managed supplier certification process. Drove continuous
improvement initiatives through CAR, site audits, FA, and quality metrics.

Lin Engineering, Santa Clara, CA
2003 - 2004
Engineering Supervisor
Managed the engineering activities to introduce new stepping motors:
drawings, BOM & work instructions.

Larscom Inc., Milpitas, CA
2001 – 2002
Manager, Quality Systems
Managed all aspects of quality resources and functions; Introduced new
product; qualified contract manufacturer; established and maintained
operations performance metrics; hosted continuous improvement team
meeting; managed regulatory compliance – UL safety, CE Mark, NEBS;
reliability testing – HALT & HASS, MTBF; ISO 9000 procedures, audits
and certification; started transitions to ISO 9000:2000 standard

Palm, Inc., Santa Clara, CA
2000-2001
Senior New Product Introduction Quality Engineer

Seagate Technology, Fremont, CA
1996-1999
Quality Manager/Sr. Staff Engineer
Liased between suppliers, design center and factories in Far East;
resolved customer complaints and led cross-functional team; trained
staff for internal ISO-9000 audits & maintained ISO qualification;
organized quarterly evaluations; coordinated gauge capability, gauge
correlation among different sites; managed reliability testing and failure
analysis; reduced customer returns by managing quality of product at shipping
point; organized training on FMEA, ISO-14000; ISO-14644 & IEST recommendations;
developed and maintained Lotus Notes database.

Western Digital Corp., Santa Clara, CA
1994-1996
Sr. Development Engineer
Developed texture and Hard-coat processes using design of experiment;
established parameters and method to characterize tribological performance
of disk surface; conducted surface Ra variability reduction projects; improved
yield of Sturgeon product by 4%.

Komag Inc., Milpitas, CA
1992-1994
Manufacturing Engineer
Established self-directed teams for continuous improvement projects; developed
single disk polishing process with extensive DOE work; strengthened SPC by
automation and checklist; automated disk loading and unloading on Texture machine;
represented Deming quality circle; improved efficiency of MDS polishers by 7%.

Olin Interconnect Technologies, Manteca, CA
1989-1992
Automation/Development Engineer
Designed and fabricated Mquad epoxy attach machine from concept; improved thermal
stability of Mquad package by modeling epoxy configuration; optimized the shape of
VIA interconnection in two layer TAB; developed thermode, excise & form die tool for
TAB frame; developed and implemented bare epoxy stamping process.